ER-260/265 Electronic Cash Register AU Program Mode Programming • 79
Clerk Programming Example
To set Clerk 5 with a code of 5 6 7, enter:
X/TIME CLERK 7 5 6
CASH/
TEND
5
Printing Clerk Codes:
If you need to verify clerk codes:
1. Turn the control lock to the PGM position.
2. Press the CLERK key.
3. The printer will print as in the example below:
___
_
THANK_YOU
___CALL_AGAIN
CLERK 1 1__
CLERK 2 2__
CLERK 3 3__
CLERK 4 4__
CLERK 5 567
CLERK 6 6__
CLERK 7 7__
CLERK 8 8__
CLERK 9 9__
CLERK 10 10_
_______PROGRAM TERMINATE
16:36 03-01-2006
000058 00
Changing the Secret Clerk Code.
You can change the existing sercret code of a clerk.
By inputting the old secret No. followed by the new secret No. of the clerk.
* If you inputting 0 in a New Secret code #, the secret No. of the clerk is initialized to the
clerk number.
X/TIMECLERK
CASH/
TEND
Repeat for each clerk
Old
Secret
code #
New
Secret
code #
To Next Page
Loading...
