ER-260/265 Electronic Cash Register AU Operating Instructions • 45
Receipt On/Off and Receipt on Request
When a receipt is not normally issued, you can turn the receipt function on or off.
If the receipt is off, you can still issue a receipt after the sale has been completed. Normally, this
function is not allowed. If you wish to allow after sale receipts, you must set system option #17 to a
value of 1. See “System Option Programming”.
To Turn the Receipt Off
♦ With the control lock in the REG position, press PO:
PO
To Turn the Receipt On
♦ With the control lock in the REG position, press PO again:
PO
Printing a Receipt after the Sale
♦ After the sale has been totaled, but before the next transaction is started, press
CASH/TEND:
CASH/
TEND
NOTE: Because receipt memory is limited, when a sale has more than 30 items or more than 3
tenders, the receipt after sale can not print all items. A row of dots is printed indicating the
receipt is incomplete.
For more than 30 items, the ‘row of dots’ is located after the 30
th
item;
For more than 3 tenders, the ‘row of dots’ is located before the last tender.
To Next Page
Loading...
