Sam4s ER-260 - Void Previous Item; Cancel; Void Position Operations

ER-260/265 Electronic Cash Register AU Operating Instructions • 33
Void Previous Item
This function allows you to correct an item registered previously in a transaction.
1. Register an item. Then register a second item.
2. To correct the first item, press CLEAR, then
press VOID:
VOID CLEAR
3. Enter the price of the first item, then press the
department key where it was registered originally.
2
2 9 1
_ ___THANK_YOU
___CALL_AGAIN
DEPT.2____________T1 $1.29
DEPT.1____________T1 $2.29
VOID
DEPT.2____________T1 -1.29
ROUND $0.01
GST AMOUNT $0.21
CASH $2.30
16:52 03-01-2006
000023 00
Cancel
The CANCEL key allows you to stop any transaction. Anything registered within the transaction
before the CANCEL key is pressed is automatically corrected. The CANCEL key may be
inactivated through programming, see “CANCEL Key Programming”.
1. Register the items you wish to sell.
2. Press the CANCEL key.
CANCEL
_ ___THANK_YOU
___CALL_AGAIN
DEPT.1____________T1 $2.29
CANCEL____---------------------
-
16:52 03-01-2006
000024 00
Void Position Operations
You can use the Void control lock position to correct any complete transaction. To correct any
transaction:
1. Turn the control lock to the VOID position.
2. Enter the transaction you wish to correct exactly
as it was entered originally in the REG control
lock position. You can enter discounts, voids,
returns, tax exemptions or any other function.
3. All totals and counters are corrected as if the
original transaction did not take place.
_ ___THANK_YOU
___CALL_AGAIN
VOID MODE
DEPT.1____________T1 -2.29
DEPT.2____________T1 -1.00
SUBTOTAL -3.29
ROUND -0.01
GST AMOUNT -0.30
CASH -3.30
16:52 03-01-2006
000025 00