80 • Program Mode Programming ER-260/265 Electronic Cash Register AU
Register Number Programming
You can program a two digit register number that will print on the lower right corner of each
transaction. If you are using more than one cash register, the register number can be used to identify
the register where the transaction was entered.
___
_
THANK_YOU
___CALL_AGAIN
MACHINE NO. 99
_______PROGRAM TERMINATE
16:36 03-01-2006
000059 99
To set a register identification number:
1. Turn the control lock to the PGM position.
2. Enter register number and press the #/NS key:
#/NS
3. Press the CASH/TEND key to end programming.
CASH/
TEND
Register Number
To Next Page
Loading...
