Sam4s ER-260 - Tendering a Check Sale

30 • Operating Instructions ER-260/265 Electronic Cash Register AU
Percent Key (+% and -%) Operations
Use the Percent keys to add a percentage surcharge or subtract a percentage from an item or the
subtotal of a sale. You can enter the amount of the percentage before pressing the -% or +% keys,
or you can program a preset percentage if you are consistently using the same percentage.
Programming determines whether it is possible to enter a percentage when the key is also
programmed with a preset percentage. See “+% and -% Key Programming” to set a preset
percentage.
Preset Percent on a Department or PLU Item
In this example the -% key is preset with a rate of 10.000.
1. Register the discounted item.
2. Press the -% key:
-%
3. The discount is automatically subtracted.
_ ___THANK_YOU
___CALL_AGAIN
DEPT.2____________T1 $10.00
-% 10.000
-1.00
ROUND $0.00
GST AMOUNT $0.82
CASH $9.00
16:52 03-01-2006
000018 00
Enter a Percent on a Department or PLU
You can also operate the -% or +% keys by entering the percentage of the discount or surcharge. If
necessary, you can enter the percentage with a decimal key (up two 3 digits, i.e. 99.999%).
_ ___THANK_YOU
___CALL_AGAIN
DEPT.2____________T1 $10.00
-% 33.333
-3.33
ROUND -0.02
GST AMOUNT $0.61
CASH $6.65
16:52 03-01-2006
000019 00
1. Register the discounted item.
2. Enter the percentage. If you are entering a
fraction of a percent or digit(s) after decimal
point, you must use the decimal key.
For example, for 1/3 off enter:
3 . 3 3 3 3
3. Press the -% key:
-%
4. The discount is automatically subtracted.