~
NOTE
•
Be
sure
to
select
the
correct
Digital
Output
or
you
will
hear
no
sound
or
just
loud
noise.
•
If
the
HDMI
device
(AV
receiver,
TV)
is
not
compatible
with compressed
formats
(Dolby
digital,
DTS)
,
the
audio
signal
outputs
as
PCM.
•
Regular
DVDs
do
not
have
BONUSVIEW
audio
and
Navigation
Sound
Effects.
•
Some
Blu-ray
Discs
do
not
have
BONUSVIEW
audio
and
Navigation
Sound
Effects.
•
This
Digital
Output
setup
does
not
effect
the
analog
(UR)
audio
or
HDMI
audio
output
to
your
TV.
It
effects
the
optical
and
HDMI
audio
output
when
your
player
is
connected
to
an
AV
receiver.
•
If
you
play
MPEG
audio
soundtracks,
the
audio
signal
outputs
as
PCM
regardless
of
your
Digital
Output
selections
(PCM
or
Bitstream).
PCM
Downsampling
Lets
you
set
48kHz
and
96kHz
PCM
down-
sampling
on
or
off.
•
Off
:
Select
when
the
AV
receiver
connected to
the
player
is
96kHz compatible.
•
On
: Select
when
the
AV
receiver
connected
to the
player
is
not 96kHz compatible. 96kHz
signals
will
be
down converted
to
48kHz.
~
NOTE
•
Even
when
peM
Downsampling
is
set
to
Off,
some
discs
will
only
output
downsampled
audio
through
the
optical
digital
outputs.
HOMI
•
If
your 1V
is
not compatible with compressed
multi-channel formats
(Dolby
Digital,
DTS)
,
the
player
may
output
PCM
2ch down
mixed
audio
even
though
you
selected Bitstream
(either
Re-
encoded
or
Unprocessed)
in
the setup
menu.
•
If
your 1V
is
not compatible with
PCM
sampling
rates
over
48kHz,
the
player
may
output 48kHz
downsampled
PCM
audio
even
though
you
set
PCM
Downsampling to
Off.
Dynamic
Range
Control
You
can
listen
at
low
volumes,
but
still
hear
dialog
clearly.
This
is
only
active
if
your
player
detects a
Dolby
Digital
signal.
• Auto:
The
Dynamic
Range
Control
will
be
set
automatically
based
on
the information provided
by
the
Dolby
TrueHD
Soundtrack.
•
Off
:
You
can
enjoy
the
movie
with
the
standard
Dynamic
Range.
•
On
:
When
Movie
soundtracks
are
played
at
low
volume
or through
smaller
speakers,
the
system
can
apply appropriate compression to
make
low-level content
more
intelligible
and
prevent
dramatic passages
from
getting too loud.
Downmixing
Mode
Lets
you
select how
the
player
will
downmix multi-
channel
audio into fewer
channels.
• Normal Stereo: Downmixes the multi-channel
audio into two
channel
stereo. Choose
when
connected
to
equipment that does not support
virtual
surround functions
such
as
Dolby
Pro
Logic.
• Surround Compatible: Downmixes multi-
channel
audio into surround compatible
stereo.
Choose
when
connected to equipment that
supports
virtual
surround functions
such
as
Dolby
Pro
Logic.
DTS
Neo:6
Mode
You
can
enjoy
multi-channel sound
from
an
Audio
CD
(CD-DA).
• Off: Outputs a 2-channel audio
signal
through
the front speakers
only.
• Cinema: Select to
play
2-channel
movie
sound
over
multi-channels.
• Music: Select to
play
2-channel music
over
multi-channels.
~
NOTE
•
If
you
are
using
an
HDMI
supported
AV
receiver,
this
option
is
available
when
you
set
Digital
Output
setup
as
PCM.
English
37
To Next Page