8.
When
done, press the ENTER button to
select
OK,
and
then
press the ENTER
button
again.
The
Create Account screen
re-
appears.
9. Select Confirm password,
and
then press
the
ENTER button.
10.
Repeat
Steps 7
and
8.
11.
When
the Create Account screen re-appears,
select Create
Account,
and
then press the
ENTER button.
The
Confirmation window
appears.
12.
Select OK,
and
then
press the ENTER
button.
The
Continue to Register Service
window appears.
13. Select Go Register,
and
then press the
ENTER button.
14.
The
Register Service Account Window
appears.
•
If
you
have
existing accounts with
any
of
the listed providers,
you
can
associate the
provider account
and
the provider account
password with your Smart
1V
Account.
Registration makes
it
easier to access
the
providers web
site.
For
registration
instructions, go to Step
2
in
Account
Management under the Settings
Menu.
•
If
you
don't
have
existing provider accounts
or
do not want to register existing accounts
at this time, select
OK, and
then
press
the
ENTER button.
You
can
also
let
the
window close
on
its
own
in
about a minute.
~
NOTE
•
You
must
use
an
e-mail
address
as
an
10.
•
You
can
register
up
to
10
User
Accounts.
•
You
do
not
need
an
account
to
use
Smart
Hub.
Account Log
In
To
log
in
to your Smart
1V
Account, follow these
steps:
1.
With
the Smart Hub
main
screen displayed
on
your 1V, press the RED
(A)
button
on
your
remote.
The
Create Account screen appears.
2. Select the
Down
Arrow
next to the
Smart
TV
ID
field,
and
then
press the ENTER button.
3. Select your
ID
from the list that appears, and
then press the
ENTER button.
The
Create
Account screen re-appears.
4. Select Password,
and
then
press the ENTER
button.
An
entry screen
and
a keypad
appears.
5.
Using
the keypad
and
your remote, enter your
password.
When
done, press the ENTER
button, select OK,
and
then
press the ENTER
button
again.
~
NOTE
•
If
you
want
Smart
Hub
to
enter
your
password
automatically,
select
Remember
my
Smart
TV
10
and
password
after
you
have
entered
your
password,
and
then
press
the
ENTER
button.
A
check
appears.
Smart
Hub
will
now
enter
your
password
automatically
when
you
select
or
enter
your
10.
The Settings Menu - BLUE (0)
.•
m.",m"·
••
·•·
.•
""
The
Settings
Menu
Screen
gives
you
access
to account management,
reset,
and
properties
functions.
To
access the Settings
Menu,
and
then
select a
menu
item, follow these steps:
1.
Press
the
BLUE
(D)
button
on
your remote.
2.
Press
the
...
~
to select a
menu
item,
and
then
press the ENTER button.
The
functions
on
the Settings
Menu
screen
are
described below.
~
NOTE
•
The
Service
Manager
item
listed
in
the
Settings
Menu
is
not
available
for
Blu-ray
Disc
players.
Account Management
The
Account Management
Menu
contains
functions that
let
you
register your service provider
accounts, change your Smart
Hub
password,
and
delete or deactivate your Smart
1V
Account.
English
59
To Next Page