Samsung BD-D7500 - Network Status

Select a network connection type.
o
01
MAC Address
= /. IP Address
SlJIlnetMask
Gateway
ONSse.ver
_1a_succosofl.Iy.
""",_a~_wrr _
..-
Settinas
Network Status
Se~
Check whether a connection to the network and
the Internet have been established.
2. Press the ENTER button.
3. Place the Samsung Wireless Router within 25
cm (10 inches) of your player to connect.
4. Wait until the connection is automatically
established.
One Foot Connection
You can set up the wireless connection
automatically
if you have a Samsung Wireless
Router which supports One Foot Connection . To
connect using the One Foot Connection function,
follow
these steps:
1. Press the ... ,. buttons to select One Foot
Connection.
The easiest way to set up the wireless network
connection
is using the WPS(PBC) function or the
One Foot Connection function.
If your wireless router has a WPS(PBC) button,
follow
these steps:
1. Press the ... ,. buttons to select WPS(PBC).
WPS(PBC)
2. Press the ENTER button.
3. Press the WPS(PBC) button on your router
within two minutes. Your player automatically
acquires all the network settings values it
needs and connects to your network.
4. The Network Status screen appears. The
player connects to the network after the
network connection is verified.
8. Use the number buttons to enter numbers.
9. When done with each field, press the ~
button to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.
10. Enter the IP Address, Subnet Mask, and
Gateway values.
11. Press the" to go to DNS Mode.
12. Press the" button to go to the first DNS
entry field. Enter the numbers as above.
13. Press the OK button.
14. The Network Status screen appears. The
player connects to the network after the
network connection is verified.
English 41