Network Services
Register Service Account
If
you have existing accounts with any of the
providers listed by the Register Service Account
function, you can associate the provider account
and the provider account password with your
Smart
1V
Account.
If
you associate the account,
you will be able to log onto the account through
Smart Hub easily, without entering your account
name or password.
To use the Register Service Account function,
follow these steps:
1.
In
the Account Management menu, select
Register Service Account, and then press the
ENTER button. The Register Service Account
Window appears.
2. Press the ...... buttons to select a Service
Provider you want to associate with your
Smart
1V
Account, and then press the
ENTER button.
~
NOTE
•
If
you
have
a
Samsung
apps
account
and
you
want
to
use
the
Samsung
Apps
function
in
Smart
Hub,
you
must
register
your
Samsung
Apps
account
here.
See
page
63
for
more
information.
3. Press the ...... buttons to select Register, and
then using your remote and the on-screen
Keypad, enter your site
10
and password.
When done, press the ENTER button.
~
NOTE
•
This
is
the
10
and
password
you
normally
use
to
access
your
account
on
this
site.
4.
If
you have entered the
10
and password
correctly, the Registered Successfully
message appears.
5.
If
you pressed OK, repeat Steps 2 through 4
to associate another Service Provider.
6. When you are done, press the RETURN
button.
60
English
Change Password
The Change Password function lets you change
your Smart Hub password. To change the
password, follow these steps:
1.
Select Change Password, and then press
the ENTER button.
2. Enter your current password. The next screen
appears.
3.
On
the next screen, enter a new password on
the first line. Enter it again on the second line
to confirm.
4. The Changing Password Complete message
screen appears. Press the ENTER button
or wait for the screen to close - about 5
seconds.
Remove Service Accounts
The Remove Service Accounts function cancels
all
your current registered Service Accounts that
you registered on the Register Service Account
screen.
Deactivate Account
The Deactivate Account function deactivates
your Smart
1V
Account and deletes it and
all
your
account settings entirely from Smart Hub.
Reset
The Reset function initializes
all
downloaded
widgets, erases
all
user accounts and settings
from the player, and resets
all
Smart Hub settings
to the factory default settings.
It
then restarts
Smart Hub as if it were starting for the first time.
Your account, however, remains
on
the Smart
Hub server. To log into your account, enter your
10
and password on the Create Account screen.
To use the Reset function, follow these steps:
1.
In
the Settings menu, select Reset, and then
press the ENTER button.
The Reset screen appears.
2. Enter the your Security password. This
is
the
password you entered if you set up a
SO
or
OVO
Parental rating
(See
page 43).
If
you did
not, enter 0000.
To Next Page