3 - 42 WS80A Service Manual
TIP Connecting to a Wireless Network
1. Use the trackball and the Set button to press the Scan button.
2. Select a wireless network to connect to.
3. Tap the Connect button to connect the system to the wireless network.
4. Tap the Disconnect button to disconnect the system from the wireless network.
5. Press the Close button to complete the setup.
▌ E-Mail
You can specify a server through which you will send and receive e-mails.
Mail (SMTP) Server
Specify the e-mail server.
Port No.
Enter a port number.
ID
Enter an ID for the e-mail server.
Password
Enter a password for the e-mail server.
To Next Page