Chapter 6.
Service Mode
6 - 5
Admin Mode Functions
▌ Language
Select the language you want the system to use. You can select by using the filter; select
one of the following seven languages: English, German, French, Spanish, Italian, Russian,
or Chinese.
▌ Test Pattern
You can test the properties of the monitor. Select Test Pattern, and press the Set button on
the keyboard to cycle through three different test patterns to test the monitor, as shown
below in [Figure 6-3].
[Figure 6.3 Test Pattern]
▌ Backup
This function backs up the user settings to external media, and can only be performed in
Admin mode.
1. When you press Backup, the ultrasound program will close, and the Backup function
will be initiated. Select OK when you are asked whether you want to exit the ultrasound
program before starting Backup.
2. In Backup screen, you can select user setting items and backup media.
3. Press Next to perform the Backup function.
4. The system will reboot when the backup is complete.
To Next Page