Chapter 7. Troubleshooting 7 - 7
Error Code
Error code Location of failure
Estimated failure
0 FILE and OTHERS FILE_NOT_FOUND
1 FILE and OTHERS DEMO_PERIOD_EXPIRED_ERROR
2 FILE and OTHERS CRC32DLL_LOAD_FAIL
10 PC Module, MAIN Board
C_INTERFACE_OPENDMA_FAIL_IN_HWINI
T
15 MAIN Board(BE & OS) PC_INTERFACE_INIT_INTERRUPT_FAIL
21 MAIN Board(AC part) NO_MOTOR_CONTROL_FOUND
22 MAIN Board(AC part) MOTOR_NULL_POSITION_LOST
23 MAIN Board(AC part) MOTOR_CONTROL_SEQUENCE_BROKEN
24 MAIN Board(AC part) GAIAMOT_DLL_LOAD_ERROR
25 MAIN Board(AC part) GAIAMOT_DLL_OLD_LOAD_ERROR
40 BF Board FPGA_DOWNLOAD_ERROR_BF
163 MAIN Board(AC part) BF_DMA_WRITE_CHECKSUM_ERROR
100 MAIN Board(BE part) FPGA_DOWNLOAD_ERROR_BE
101 MAIN Board(CW part) FPGA_DOWNLOAD_ERROR_DMA
102 MAIN Board(BE part) FPGA_DOWNLOAD_ERROR_DMA
114 MAIN Board(BE part) RTC_STOP_ERROR
162 DDM, BF Board HV_HIGH
[Table 7.1] Error Code Table
To Next Page
Loading...