Chapter 3. Installing the Product 3 - 21
Display
Select the Display tab in the Setup screen. Or tap Display on the touch screen. Specify
display-related options.
[Figure 3.10 Setup – Display]
▌ Power Saving
Screen Saver
Select whether or not to display the screen saver. When this is On, you can set the
screensaver to be activated in 1 to 30 minutes.
Auto Freeze in 10 Minutes
Scan mode will freeze automatically if the product is not used for 10 minutes.
TIP
The Scan Mode is frozen automatically, regardless of Auto Freeze setting, when the
product is not used for 1 hour.
NOTE
In 3D mode, Auto Freeze is activated when the product is not used for 20
minutes.
To Next Page
Loading...