9 - 18 WS80A Service Manual
▌ Electric Shocks
The probe uses electrical energy. If it touches conductive materials, there are risks of
electric shocks to the patient or the user.
WARNING
■ Have the system regularly inspected by Samsung Medison
technicians for electric leaks.
■ Do not immerse the probe into liquid.
■ Do not drop the probe or apply mechanical shocks.
■ Inspect the housing, strain relief, lens and seal for damage, and check
for any functional problem before and after each use.
■ Do not apply excessive force to twist, pull or bend the probe cable.
■ The power protection fuse protects the probe and the product from
excess current. If the power monitoring protection circuit detects
excess current, it immediately shuts off the current to the probe in
order to prevent the probe surface from overheating and to restrict the
ultrasound power output.
■ The temperature of the product for making contact with patients is
limited under 43°C. The ultrasound power output (AP&I) is in
compliance with US FDA standards.
To Next Page