3 - 8 WS80A Service Manual
▌ External Peripheral Devices
These are peripheral devices that can be connected for use when needed and are connected
via the USB port located at the rear panel.
NOTE
When remove the removable disk, use Utility > Storage manager.
If you are using USB 1.1 flash memory, the system may fail to recognize
the device. In such circumstances, remove the flash memory from the
console and then reconnect it.
USB Video Printer
USB Line Printer
USB to RS-232C Serial Cable
Foot Switch
Other Flash Memory Media
CAUTION
When installing or uninstalling a peripheral device that uses a USB
port on the console, be sure to turn the console’s power off. If the
power is not turned off completely, the system or the USB peripheral
device may fail to work correctly.
Do not connect additional external peripheral devices to the auxiliary
socket outlet. Doing so may decrease safety level.
To Next Page
Loading...