Samsung WS80A - Page 98

Chapter 3. Installing the Product 3 - 23
▌ Information
 Direction Marker
Set the Direction Marker. Select between SAMSUNG WS80A or WS80A.
 Doppler Axis
Select the units of measurement for the axis scale in Spectral Doppler Mode.
– cm/s: Specify the Doppler axis scale unit as cm/s.
– m/s: Specify the Doppler axis scale unit as m/s.
– kHz: Specify the Doppler axis scale unit as kHz.
▌ Wide Screen Mode
The Wide Screen mode can be turned On or Off by using the trackball in Single, Dual, or
Quad mode. Turn this option off to set the screen to 4:3 ratio.
▌ Display
 TGC Line
This sets whether to display the TGC line. When TGC Line is Off, the TGC line appears
when you set the TGC line, and then disappears after three seconds.
 Image Info
This sets whether to display image information. When the image information interferes
with an image and is turned off, it will not be displayed.
 TI Type
Specify the TI to display on the screen as TIs (Soft tissue Thermal Index), TIb (Bone
Thermal Index), or TIc (Cranial bone Thermal Index).
 Patient Name with
– Age: Select whether to display the name and age under the patient ID.
– Birthday: Select whether to display the name and date of birth underneath the patient
ID.