-11-
Security Function Notice
This projector provides security functions such as "Key lock", "PIN code lock" and "Logo PIN code lock".
When the projector has set these security function on, you are required to enter correct PIN code to use
the projector. If you do not know the correct PIN code to the projector, the projector can no longer be
operated or started. In this case, you must reset those function first according to the resetting procedure
described below and then check up on the projector.
Function Description
Key lock
Locks operation of the top control or the remote con-
trol.
If the Key lock is enabled with top control lock, the
projector can no longer be started.
Initial setting: Key lock function is disabled.
PIN code lock
Prevents the projector from being operated by an un-
authorized person.
Initial code: “1234”
Logo PIN code lock
Prevents an unauthorized person for changing the
start-up logo and captured image on the screen.
Initial code: “4321”
Security Function Disable
Resetting procedure
1. Disconnect the AC power cord from the AC outlet.
2. As pressing the
SELECT button, connect the AC power cord into an AC outlet again.
3. Keep pressing the
SELECT button and then press the ON/STAND-BY button.
4. Release the
ON/STAND-BY button first and then release the SELECT button.
- The PIN code lock and Logo PIN code lock will be reset as the initial PIN code at the factory and
the key lock function is disabled.
Please refer to the owner's manual for further information of the security functions.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
