Sanyo PLC-WU3800 - Part Names and Functions; Top Control Panel

-12-
This function is available when operating the projector via network.
Network...... Supply the power to the network function even after turning off the projector.
You can turn on/ off the projector via network, modify network environment,
and receive an e-mail about projector status while the projector is powered off.
Eco............. Select “Eco” when you do not use the projector via network. The projector’s network
function will stop when turning off the projector.
When "Eco" is selected, several functions will be restricted.
(Power consumption when standing by increases in the state of "Network". )
Restricted Function in the standby mode
Standby mode Notice
Function Eco Network
Serial command control
- -
✔
Network Function
- -
✔
Monitor Out
- -
✔
Audio Out
- - - -
Direct on
- -
✔