47
Keystone
This function is used to store or reset the keystone
correction when the AC power cord is unplugged. Use the
Point buttons to switch between each option.
Store ....... Keep the keystone correction even when the
AC power cord is unplugged.
Reset ....... Release the keystone correction when the AC
power cord is unplugged.
To correct keystone distortion, press the SELECT button.
Keystone appears on the screen. Use the Point buttons
to correct keystone distortion (p.24).
Background
Select the background screen for when no input signal is
detected. Press the Point buttons to switch between
each option.
Blue . . . Blue colored background.
User . . . The image you captured.
Black . . Black colored background.
This function decides whether to display On-Screen
Displays.
On ........................... Show all the On-Screen displays.
Use this function when you want
to project images after the lamp
becomes bright enough. The factory
default setting is in this option.
Countdown Off....... Show the input image instead of
the countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
Off ........................... Hide the On-Screen Displays except;
On-Screen Menu
Power off? (p.21)
No signal for Power management
(p.53)
Please wait ...
Arrows for the True function in the
Screen Menu (p.36)
P-Timer
Display
Setting
Keystone
To Next Page
Loading...
Need help?
General
Weight and Dimensions
