Sanyo PLC-XU115 User Manual

32
Computer Input
TheAutoPCAdjustment
functionoperatestoadjust
theprojector.
PC System Menu
ThePCSystemMenuicon
 Selectedsystemis 
 displayed.
Systemsinthisdialogbox
canbeselected.
PC System Menu
CustomizedMode(1–5)setin
thePCAdjustMenu(pp.34–35).
Computer System Selection
Thisprojectorautomaticallytunestovarioustypesof computersbasedonVGA,SVGA,XGA,SXGA,WXGA,
orUXGAwithitsMulti-scansystemandAutoPCAdjustment.Ifacomputerisselectedasasignalsource,this
projector automatically detects the signal format and tunes to project a proper image without any additional
settings.(Signalformatsprovidedinthisprojectorareshownonpages70-71.)
Oneofthefollowingmessagesmayappearwhen:
The projector cannot recognize the connected
signal conforming to the provided PC Systems.
The “Auto” is displayed on the System Menu
boxandtheAutoPCAdjustmentfunctionworks
to display proper images. If the image is not
projected properly, a manual adjustment is
required(pp.34-35).
There is no signal input from the computer.
Check the connection between your computer
and the projector. (See “Troubleshooting” on
page63.)
Auto
-----
The preset system is manually adjusted in the
PC Adjust Menu. The adjusted data can be
storedinMode1–5(pp.34-35).
Mode 1
PCSystemsprovidedinthisprojectorischosen.
Theprojectorchoosesapropersystemprovided
intheprojectoranddisplaysit.
SVGA 1
*Mode1andSVGA1areexamples.
PresstheMENUbuttontodisplaytheOn-ScreenMenu.
UsethePoint◄►buttonstomovetheredframepointer
tothePCSystemMenuicon.
UsethePoint▲▼buttonstomovetheredarrowpointer
to the desired system and then press the SELECT
button.
1
2
PCsystemcanalsobeselectedmanually.
Selecting Computer System Manually
Downloaded From projector-manual.com Sanyo Manuals

Sanyo PLC-XU115 Specifications

General

Projection distance	0.93/11.47 m
Vertical scan range	50 - 100 Hz
Horizontal scan range	15 - 100 kHz
Projection technology	LCD
Contrast ratio (typical)	500:1
Projector native resolution	XGA (1024x768)
Keystone correction, vertical	-40 - 40 °
I/O ports	SD Card Slot
Audio input	1
Aspect ratio	4:3
Special features	Soft Carry Bag
Networking features	Ethernet & Wireless
F-number (relative aperture)	1.7
Lamp type	NSH
Lamp power	275 W
Light source type	Lamp
Service life of light source	2000 h
Service life of light source (economic mode)	3000 h
Dot clock scanning frequency	140 MHz
Analog signal format system	NTSC, PAL, SECAM
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power consumption (typical)	266 W

Weight and Dimensions

Package weight	3500 g