Sanyo PLC-XU115 - Screen Size Adjustment

38
Computer Input
Store
ExittheImageAdjustMenu.
Quit
Storeicon
Tostoretheadjusteddata,selectStoreandpressthe
SELECTbutton.UsethePoint▲▼buttonstoselectone
fromImage1to4andpresstheSELECTbutton.
Aconfirmationboxappearsandthenselect[Yes].Stored
datacanbecalledupbyselectingan“Image(1–4)”inthe
ImageModeSelectiononpage36.
ImageModeMenu
Move the red frame
pointer to an image
item to be set and
t h e n  p r e s s  t h e
SELECTbutton.
A confirmation
box  app e a r s
and then select
[Yes]
Thisprojectorhasthepicturescreenresizefunction,whichenablesyoutocustomizetheimagesize.
Screen Menu
Screen Size Adjustment
Providetheimagetofitthescreensize.
Normal
True
Provide the image in its original size. When the original
imagesizeislargerthanthescreensize(1024x768),the
projectorenterstothepanningmodeautomatically.Usethe
Point▲▼◄►buttonstopantheimage.Whenadjusted,the
arrowswill turn red.When reached tothe correction limits,
thearrowswilldisappear.
Full
Providethefullscreenimage.
Notes:
 •The Screen Menu, except for "Normal"
and"Custom",cannotbeoperatedwhen
720p(HDTV), 1035i (HDTV), or 1080i
(HDTV)  is selected in the PC System
Menu(p.32).
 •This projector cannot display any
resolution higher than 1600 x 1200. If
your computer’s screen resolution is
higherthanit,resettheresolutiontothe
lowerbeforeconnectingtotheprojector.
 •Theimagedatainotherthan1024x768
ismodifiedtofitthescreensizeininitial
mode.
 •True, Full, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p, or
575pisselectedinthePCSystemMenu
(p.32).
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
framepointertotheScreenMenuicon.
1
Use the Point ▲▼ buttons to move the red frame
pointer to the desired function and then press the
SELECTbutton.
2
Wide
Providetheimagetofitthewidevideoaspectratio(16:9)by
expanding the image width uniformly. This function canbe
usedforprovidingasqueezedvideosignalat16:9.
Move the red frame
pointer to the function
andpresstheSELECT
button.
ScreenMenuicon
Downloaded From projector-manual.com Sanyo Manuals