Operators Handbook DCU3 – System
14., Supplement
BAEDCU3 - Rev. 4.6 - 0504 14 - 9
14.6 Arrangement and Assignment Plans
For the arrangement plans please refer to the Technical Manual DCU3 - system, which is
included in the delivery of the device or available on special request.
For customized DCU configurations you will receive a corresponding document set, which
can be included herein or be delivered separately with the equipment. You can add an
document set delivered extra to this chapter.
If the interface specifications do not match your individual DCU3 - System, please contact
your representative of Sartorius BBI Systems GmbH or Sartorius AG for further support or
write directly to
Sartorius BBI Systems GmbH
Dept. FA (Product engineering, automation projects)
Schwarzenberger Weg 73-79
D - 34212 Melsungen, Fed. Republic of Germany
phone +49 56 61 - 71 34 00, fax +49 56 61 - 71 37 02
14.7 Declaration of Conformity with EC-Directives, Standards and Technical
Specifications
By the „Declaration of Conformity“, which may be enclosed in this document or can be de-
livered extra, the Sartorius BBI Systems GmbH confirms, that the DCU - system fulfills the
requirements of all mentioned EC-directives, harmonized and national standards and tech-
nical specifications. The signatures of the English form substitutionally confirm the validity of
the declaration for all other language forms.
To Next Page
Loading...
Need help?
General