Operators Handbook DCU3 – System
8., Main Function „Recipes“
BAEDCU3 - Rev. 4.6 - 0504 8 - 7
8.7 Digital Input Alarms
An alarm monitoring for digital inputs („Digital Input Alarms“) can also be specified in a recipe. For this
all inputs must be made as described in chapter 6.24.
If the alarm monitoring of a digital input should not be influenced by a recipe, the alarm state of this
digital input must be set to „no change“ when entering the recipe.
8.7.1 Operating Display
Tag Entry Displayed value or function, required input
ALARM MODE Additional input of state for alarm monitoring in the recipe
----- (no change): recipe does not effect the alarm monitoring
8.7.2 Special Notes
A digital input, that should not be switched on for alarm monitoring by the recipe, must be
set to „no change“ in the recipe.
To Next Page
Loading...