Sartorius DCU 3 - Process Time

Operators Handbook DCU3 – System
7., Main function „Batch Control“
BAEDCU3 - Rev. 4.6 - 0504 7 - 5
7.3 Process Time
A „process time“ can be displayed in the headline of the operating display in addition to the continuous
display of the actual date and time. For this the DCU3 - system includes an extra process time clock.
It is possible to start the process time clock at zero or at a predefined time. If no process time is active
the clock starts automatically with the sterilization program or when a recipe is loaded for the first time.
7.3.1 Operating Display
Tag Entry Displayed value or function, required input
PTIME Input and start of the process time
0000:00
− start from zero
hhhh:mm
− start from preset time in [hours:minutes]
7.3.2 Special Notes
 The process time can be set via the stop watch in the 1
st
line at any time.
 The display range of the process time is 9,999 hours and 59 minutes.