Operators Handbook DCU3 – System
9., Main function „Maintenance“
BAEDCU3 - Rev. 4.6 - 0504 9 - 10
9.7 Settings of Measurement Ranges
The main function „Maintenance“ allows for changing the thresholds (lower and upper limits) of the
measuring ranges for all process values. The settings preconfigured on delivery correspond with the
fermentor system to which the DCU3 - system is assigned to.
Only authorized service personnel is allowed to change the settings of this menu.
9.7.1 Operating Display
Tag Entry Displayed value or function, required input
No 1 ... n Logical table number of process value
Tag Name [PV] Display of the name of the process value, whose measurement
range thresholds can be changed
MINIMUM [PV] Input of lower limit for measuring range
MAXIMUM [PV] Input of upper limit for measuring range
To Next Page
Loading...