Operators Handbook DCU3 – System
9., Main function „Maintenance“
BAEDCU3 - Rev. 4.6 - 0504 9 - 9
9.6.2 Abbreviations (TAGs) of Analog Outputs
For a complete list of abbreviations (TAGs) of analog outputs refer to the supplement.
Unassigned spare outputs have their physical channel assignment as TAG. Example:
– AOPnn (Analog Output Process): analog output for process
9.6.3 Special Notes
The physical signal level of the analog outputs (AOM) can be configured within :
– 0 ... 10 V (0 ... 100 %)
– 0 ... 20 mA (0 ... 100 %)
– 4 ... 20 mA (0 ... 100 %)
After operation in „manual“ mode all analog oututs must be reset to „auto“. Other-
wise the functions of the DCU3 - system will be restricted.
To Next Page
Loading...