Operators Handbook DCU3 – System
3., Function Selection and Inputs
BAEDCU3 - Rev. 4.6 - 0504 3 - 5
3.1.4 „Touch keys“ in the Menu „Main“
After switching on of the system the graphical overview in the menu „Main“ provides a schematic dis-
play of the main functional elements of the individual fermentor system, together with the most import
process parameters and the „touch keys“ for selection of the related functions:
Only for the single unit at fermentor systems with one culture vessel
As an overview of all subunits at fermentor systems with 2…4 culture vessels
At multible vessel fermentor systems the main menus of the subunits can be accessed as follows:
Via the touch key integrated in the overview display showing the vessel no. of the subunit
(only for DCU3 systems available from about April 2002 on and as far as implemented).
Via the direct function key CHANGE UNIT
Menu „Main“: Direct access to the main menus of subunits at fermentors with 2..4 culture vessels:
Example: BIOSTAT
®
B-DCU twin Example: BIOSTAT
®
B-DCU quattro
The touch key „All vessel“ can be used to return to the overview display of all units.
The direct function key CHANGE UNIT cyclically switches over the displays of the main menus of all
units and the individual subunits:
All vessels vessel 1 vessel 2 (vessel 3, 4, if available) all vessels
To Next Page
Loading...