Entering the User Password
Enter/Change Password
§ Select the Setup menu: Press M
> SETUP SELECTION
is displayed
§ Select the user input function:
Press the Input soft key
> The password prompt
is displayed:
$ Enter the User Password
(see below)
$ Confirm password:
Press the l soft key
> User data is displayed
§ Select the password setting
function: Press the q soft key
repeatedly until
> Enter password:
is displayed, together with the
current password setting
§ Define a new password:
Enter letters/numbers for the new
password (8 characters max.)
To delete the current password:
press . and confirm
§ To confirm the new password:
press the l soft key
§ Exit the Setup menu:
Press M
> Restart your application
User Password: 40414243
Appendix
To Next Page
Loading...
