46
Counting A
Purpose
With the Counting program you
can determine the number of pieces
of approximately equal weight.
You can use this application program
in combination with a program
chosen from Application 2
(checkweighing, time-controlled
functions) and one from Application
3 (totalizing, net-total formulation,
statistics).
Available Features
– Optional scale configuration in
Setup for automatically initializing
this application and loading
the most recent reference sample
quantity “nRef” and average
piece weight “wRef” when you
switch on the scale (automatic
initialization)
– Reference sample quantity “nRef”
entered manually
– Average piece weight “wRef”
entered manually
– Storage of the current weight
value for the preset reference
sample quantity “nRef”, to
be called up when the Counting
program is initialized
– Setting the accuracy when the
reference sample weight
“wRef” is stored for calculating
a piece count
– Optional configuration for having
the quantity and sample weight
output automatically via the data
interface port after initialization or
reference sample updating while
running the Counting program
(print application parameters)
– Toggling between piece count
and weight value by pressing the
Count. or Weigh. soft key
Factory Settings
Accuracy when calculating piece
weight:
Display accuracy
Reference sample updating:
Automatic
Soft Key Functions
nRef Store value input
as reference sample
quantity
wRef Store input value
as reference sample
weight
Update Reference updating
criteria met; reference
updating can be
performed
Count. Toggle to the Counting
application
To Next Page
Loading...
Need help?
General