Sartorius Factory Series FC06BBE-S User Manual

111
Error Codes
Care and Maintenance
Service
Regular servicing by a Sartorius
technician will extend the service
life of your scale and ensure
its continued weighing accuracy.
Sartorius can offer you service
contracts, with your choice of regular
maintenance intervals ranging from
1 month to 2 years.
Repairs
Repair work must be performed by
trained service technicians. Any
attempt by untrained persons to
perform repairs may lead to hazards
for the user.
Cleaning
! Make sure that no dust or liquid
enters the scale housing
! Do not use any aggressive
cleaning agents (solvents or
similar agents)
§ Unplug the AC adapter from the
wall outlet (mains supply)
§ If you have a data cable
connected to the interface,
unplug it from the scale
§ Carefully remove any sample
residue/spilled powder by using
a brush or a hand-held vacuum
cleaner
§ Clean the scale using a piece
of cloth which has been wet with
a mild detergent (soap)
§ After cleaning, wipe down the
scale with a soft, dry cloth
Replacing the Dust Cover
> Instructions for replacing
a damaged dust cover
FC06BBE-S
§ Remove the following parts from
the scale:
– Draft shield cover
– Glass draft shield cylinder
– Weighing pan
– Pan support
– Shield disk: turn clockwise
and lift off
– Old dust cover
§ Place the new dust cover on
the scale and press down
on the front and back along the
edges until it is seated firmly
§ Place the shield disk
on the scale and turn it
counterclockwise
§ Follow the above instructions
in reverse order when placing
remaining parts back on
the scale.
FC6CCE-H, FC2CCE-S, FC12CCE-S,
FC6CCE-S
§ Remove the following parts from
the scale:
– Weighing pan
– Pan draft shield (depending on
scale model)
– Old dust cover
§ Place the new dust cover over
the scale
§ Follow the above instructions
in reverse order when placing
remaining parts back on
the scale.
! The dust cover must not touch the
weighing pan
Safety Inspection
If there is any indication that safe
operation of the scale with the AC
adapter is no longer warranted:
§ Turn off the power and
disconnect the equipment from
AC power immediately
> Lock the equipment in a secure
place to ensure that it cannot be
used for the time being
Safe operation of the scale with the
AC adapter is no longer ensured
when:
– there is visible damage
to the AC adapter
– the AC adapter no longer
functions properly
– The AC adapter has been stored
for a relatively long period under
unfavorable conditions
In this case, notify your nearest
Sartorius Service Center or the
International Technical Support Unit
based in Goettingen, Germany.
Maintenance and repair work may
only be performed by service
technicians who are authorized by
Sartorius and who
– have access to the required
maintenance manuals
– have attended the relevant
service training courses

Sartorius Factory Series FC06BBE-S Specifications

General

Brand	Sartorius
Model	Factory Series FC06BBE-S
Category	Scales
Language	English