Operating the Scale
49
Weighing in Percent B
Purpose
This application program allows
you to obtain weight readouts
in percent which are in proportion
to a reference weight.
You can use this application program
in combination with a program
chosen from Application 2
(checkweighing, time-controlled
functions) and one from Application
3 (totalizing, net-total formulation,
statistics).
Available Features
– Reference percentage “pRef”
loaded from long-term memory
when you turn on the scale
– Optional scale configuration in
Setup for automatically initializing
this application and loading the
most recent reference percentage
“pRef” entered with reference
weight “Wxx%” when you turn on
the scale
– Reference percentage “nRef”
entered manually
– Store the current weight as the
reference percentage weight
“Wxx%” for initializing the
weighing-in-percent application
program
– Reference weight “Wxx%”
entered manually
– Storage parameter (rounding-off
factor) for storing the reference
weight “W100%” in percentage
calculation can be configured
– Configuration of decimal places
displayed with a percentage
– Optional configuration for having
the reference weight “Wxx%”
and reference percentage
automatically output via the data
interface port after initialization of
the weighing-in-percent program
(print application parameters)
– Toggle the display between
percentage and weight readout
by pressing the Weigh. soft key
– Toggle between the
weighing-in-percent program
and other applications (e.g.,
checkweighing) by pressing
D/[TOGGLE]
Factory Settings
Storage parameter:
Display accuracy
Digits displayed with percentage:
2 digits
Soft Key Functions
pRef Store value input as
reference percentage
Wxx% Store input value as
reference sample weight
Perc. Toggle to the Weighing-in-
percent application
Restar Store next value
(New)
To Next Page
Loading...
Need help?
General