80
Extra Functions
(in the Application menu)
Second Tare Memory
(Preset Tare)
Purpose
With this function you can store the
weight currently on the scale
as a tare weight, or use the numeric
keys to enter a number for a preset
tare weight.
You can use this function in
combination with a program from
Application 1 (e.g., counting,
weighing in percent), one from
Application 2 (checkweighing, time-
controlled functions) and one from
Application 3 (totalizing, formulation,
statistics).
Available Features
– Store a weight on the scale
in the second tare memory
(without numeric input)
– Store a numeric value in the
second tare memory (input using
the numeric keys)
– Label a net value as d
when there is a value stored in
the second tare
– You can assign this function to
the fourth or fifth soft key (from the
right), i.e. F4 or F5
The soft key designation for this
function is: PT1/T1
– Automatic printout when
a value is stored or input (see
“Configuring the Scale”)
– Press c to delete the (preset)
tare value
Factory Settings
Automatic printout:
Off
Soft Key Functions
PT1/T1 Store weight as tare value
PT1 Store input value
as tare value
Preparation
§ Turn on the scale: Press e/[ON/OFF]
> Sartorius logo is displayed, self-test is performed
§ Select Extra function (F4) or Extra function (F5) in the Setup menu:
Press M
§ Select the Application menu: App soft key
§ Select Extra func. (F4) or Extra func. (F5)
§ Select 2nd tare memory
§ Confirm 2nd tare memory
§ Select and confirm:
– Automatic printout:
Net value or
Tare/preset tare or
Off
see also the “Application Menu (Overview)” in the chapter entitled
“Configuring the Scale”
§ Save settings and exit the Setup menu: Press M
To Next Page
Loading...
Need help?
General