Sartorius Factory Series FC06BBE-S User Manual

66
Preparation
§ Turn on the scale: Press e/[ON/OFF]
> Sartorius logo is displayed, self-test is performed
§ Select the “Time-controlled functions” application in the Setup menu:
Press M
§ Select the Application menu: App soft key
§ Select Application 2: Press the q soft key and then the
O soft key
§ Select Time-controlled functions: Q or q soft key
§ Confirm Time-controlled functions: O soft key
§ Select and confirm:
– Function after time interval:
Beep or
Lock in readout or
Automatic printout of values or
Store value in applicat. 3 memory
– Automatic function restart:
On or
Off
– Storage mode:
Without stability or
After stability or
After higher stability
– Print then tare:
Off or
On
see also the “Application Menu (Overview)” in the chapter entitled
“Configuring the Scale”
§ Save settings and exit the Setup menu: Press M
Print Net Values without Printout of Time
Configuration settings:
Setup: App: Basic settings: Printout configuration: Auto. at init.: Off
Additional Functions
In addition to the functions for:
– alphanumeric input,
– taring (not during alphanumeric
input),
– printing,
you can also access the following
functions from this application:
– calibration (not during alpha-
numeric input or initialization),
– toggling to another application
(e.g., counting),
– setup,
– turning off the scale.
Calibration/Adjustment
§ Press the isoTST soft key
> See “Calibration/Adjustment”
for further instructions
Toggling to Another Application
§ Press D/[TOGGLE]
> See the section on the
corresponding application
program for further instructions
Setup (setting parameters)
§ Press M
> See “Configuring the Scale”
for further instructions
Turning Off the Scale
§ Press e/[ON/OFF]
> The scale shuts off
> The display goes blank

Sartorius Factory Series FC06BBE-S Specifications

General

Brand	Sartorius
Model	Factory Series FC06BBE-S
Category	Scales
Language	English