Operating the Scale
97
Printing a Data Record
Purpose
You can generate a printout of
weights, other measured values and
identification numbers for
documentation purposes. You can
format the printout to meet individual
requirements.
Available Features
Print manually/automatically:
To print the information contained in
the measured value line (weight
readout, calculated value, numeric
input, alphabetic input)
Line format: You can configure
a data ID code of up to 6 characters
for each of the values printed;
this data ID code is printed at the
beginning of the line
Sample ID: You can configure an
extra line for identification of
each weighed or calculated value
Print application parameters:
You can generate a printout of the
values configured for initialization of
an application before printing the
measured results
ISO/GMP-compliant printout:
To print out parameters relating to
weighing conditions
Auto print: To have a printout
generated automatically when certain
conditions are met, e.g., time
elapsed, stability reached, etc.
Print animal weights: For an
automatic printout of animal weight,
or of animal weight plus calculated
weight after averaging
Auto print checkweighing results: for
automatic printout of a weight when
it lies within preset limits at stability
Auto print with time-controlled
functions: for automatic printout
of weights after a preset time period
has elapsed or at a defined time
Printout of intermediate or final
evaluation for totalizing, formulation
and statistics by pressing the MR
soft key
Setting a Printout Acceptable
for Legal Metrology
You can configure the scale menu to
generate data records on a Sartorius
printer that are acceptable for
legal metrology (last digit marked):
– YDP01IS: 5 5 4
– YDP02: 5 5 5
– YDP03: 5 5 6
Factory Settings
Manual/auto print mode:
Individual printout on request,
or automatic printing dependent
on stability:
Manual with stability [6-1-2]
Print basic application settings:
Printout of one or more initialization
values for the current application: Off
Line format:
ID code for weighed or calculated
value; up to 6 characters:
For other apps/GLP (22 characters)
ISO/GLP/GMP printout:
Documentation of weighing
conditions for every series of
weighing operations: Off
Auto print:
Automatic printout of
weighed values:
No setting; see: Manual/
auto print mode [6-1-2]
Stop auto print: not possible
[6-2-2]
Time-dependent auto print:
1 display update [6-3-1]
Print animal weights:
Automatic printout of average or
average and calculated values:
Average weight only
Auto print checkweighing:
Automatic printout of weight values
within the checkweighing range
at stability: Off
Auto print time-controlled functions:
Function after time interval: acoustic
signal (not: Automatic printout)
Evaluation of totalizing, formulation
and statistics data:
Evaluation mode, MR function:
Intermediate evaluation, print
§ See “Configuring the Scale” for
details on how to set parameters
To Next Page
Loading...
