Record Configuration
Depending on the particular menu code setting selected, data are released
or blocked for a printout or on-screen output. Configure the data output record
according to your specific requirements as follows:
Record with Date/Time:
Output “Date/Time” Code
Off 7 4 1
Date only 7 4 2
Time only 7 4 3
Date and time 7 4 4*
Record with Tare Weight/Net Initial Sample Weight
Output “Tar/Net”: Code
Off 7 5 1
Tare weight only 7 5 2
Net initial sample weight only 7 5 3*
Tare weight and net initial sample weight 7 5 4
Record with Residue:
Output “Res” Code
Off 7 6 1
Residue in wt. unit only 7 6 2*
Residue in percent only 7 6 3
Residue in wt. unit and percent 7 6 4
Record with Difference:
Output “Diff” Code
Off 7 7 1*
Difference in wt. unit only 7 7 2
Difference in percent only 7 7 3
Difference in wt. unit and percent 7 7 4
* = factory setting
3–32
To Next Page
Loading...
