Differential Weighing and Backweighing with Additional Requirements
Display Parameter for Readouts in Percent
One of the following display parameters can be set for readouts in percent:
The readout in percent is displayed Code
For MC 210 S, For MC 5(-0CE),
MC 210 P, SC 2 (-0CE)
MC 410 S (-0CE) and MC 21 S
Without decimal places 3 6 1 3 5 1
With one decimal place 3 6 2 3 5 2*
With two decimal places 3 6 3* 3 5 3
With three decimal places 3 6 4 3 5 4
Use in Combination with Other Programs
The differential weighing and backweighing program can be used in combination
with other application programs. This means you will have all functions of the
combined program available in addition.
Program Code
Over/under checkweighing (net weight) 2 2 3
Over/under checkweighing (difference in weight) 2 2 4
* = factory setting
3–33
To Next Page
Loading...
