Sartorius MC 210 S - Control Commands with Upper-Case Letters and Ambient Adaptation; Control Commands with Upper-Case Letters; Adaptation to Ambient Conditions via Commands

Control Commands with Upper-Case Letters or Special Characters
Print; stop/start auto print
Acoustic signal
Self-test
Tare
Internal calibration
Internal linearization
The commands “P” through “=” do not affect the code settings of the
balance operating menu. The command “S” causes the processor to reinitialize
(turns the balance off and back on again).
The balance will operate according to the commands available up until the
processor is reinitialized. Once the balance has been turned on, the processor will
always recognize the codes entered by the user in the balance operating menu.
Block the keys
Release the keys
Adaptation to Ambient Conditions
Very stable
Stable
Unstable
Very unstable
ESC N CR LF
ESC M CR LF
ESC L CR LF
ESC K CR LF
ESC R CR LF
ESC O CR LF
ESC = CR LF
ESC Z CR LF
ESC T CR LF
ESC S CR LF
ESC Q CR LF
ESC P CR LF
4–8