Sartorius MC 210 S - Motorized Draft Shield Operation for MC 5;SC 2; Draft Shield Operation Options

MC 5, SC 2 (-0CE):
You can operate the motorized draft shield (34) in one
of the following ways:
– Semiautomatically using the l or r key (23)
(aperature angle approx.100°)
– Using an external foot or hand switch
(see part 5, “Accessories”)
– By a command from an on-line computer
(see part 4, “Interface Description”)
– Fully automatically, e.g., for the functions tare,
calibration, print, etc. (see part 2, “Balance
Operating Menu”)
– With a special display mode while the draft shield
is open (see part 2, “Balance Operating Menu”)
– Manually
1–23