Data Printout/Record (menu code 8 10 3)
To have a data record printed out, perform the following:
– Press p to output the printout heading and the first value (after you have turned
on the balance or cleared a function by pressing c)
– Press p to output additional data
– To end printout generation and recording of data, press the c key
(generation of an ISO/GLP-compliant printout or record is also ended
when a calibration or linearization operation is started)
During data printout, the print symbol p appears on the display of the balance.
The printout of the record can have the following lines:
-------------------
MC1 - Sartorius : Balance family and manufacturer
Model MC5 : Balance model
S/N 030800046 : Serial no. of the balance
Id 4-32-1 : ID no.(e.g., for identifying
a workstation/operator)
-------------------
Date : 30-Jul-95 : Current date
Start: 10:05:30 : Time at which the application started
Ser. : : Field for entering the project number
N + 4.490 mg: Measured values/weights
N + 14.486 mg
N + 53.350 mg
End : 10:05:45 : End of application
Name : : Field for signature of the operator responsible
-------------------
2–27
To Next Page
Loading...
