Satec PM180 - 3 MICS - Model Implementation Conformance Statement; Model Conformance; Common Data Attributes Classes; Quality

11
3 MICS - Model Implementation Conformance
Statement
This chapter contains the MICS conformance statement as required by IEC 61850-10. It lists
data object model elements supported by the PM180 and provides definitions of the logical
nodes, common data classes and data attribute types as defined in IEC 61850-7-3 and IEC
61850-7-4.
3.1 Model conformance
The model conformance of the PM180 is described by its ICD file.
3.2 Common data attributes classes
The following tables indicate which fields are supported in each Common Data Attribute
Class. Not listed fields are either optional (O) or conditional (C) and are not supported by the
PM180. Mandatory fields (M) are always present.
Quality
Attribute name Attribute type Value/Range M/O/C Comments
validity CODED ENUM good | invalid M Supported
detailQual PACKED LIST M Supported
overflow BOOLEAN FALSE M Defaulted
outOfRange BOOLEAN TRUE | FALSE M Supported
badReference BOOLEAN TRUE | FALSE M Supported
oscillatory BOOLEAN FALSE M Defaulted
failure BOOLEAN TRUE | FALSE M Supported
oldData BOOLEAN FALSE M Defaulted
inconsistent BOOLEAN FALSE M Defaulted
inaccurate BOOLEAN FALSE M Defaulted
source CODED ENUM process M Defaulted
test BOOLEAN FALSE M Defaulted
operatorBlocked BOOLEAN FALSE M Defaulted
Analog value
Attribute name Attribute type Value/Range M/O/C Comments
i INT32 integer value C
f FLOAT32 floating point value C
Only one of the attributes may be present for a given instance of DATA.
Configuration of analogue value
Common data attribute class is not supported.
Range configuration
Common data attribute class is not supported.
Step position with transient indication
Common data attribute class is not supported.