6
1 General
The PM180 is provided with an embedded IEC 61850 server compliant with the IEC 61850
set of standards.
This document contains the IEC 61850 conformance statements that give the summary of
the device data object model, protocol implementations and communication capabilities of
the PM180.
For detailed information on operating the PM180 and communication settings refer to the
PM180 Operation Manual.
IMPORTANT
Control commands addressed to the CSWI switch controller nodes and to the boGGIO
general binary output nodes will be rejected until the internal BOOLEAN variable
REMOTE MODE is set to TRUE via a setpoint logic equation. See Controls in Section 5.3
for details.
To Next Page
Loading...
