45
6.4 Configuring Report Control Blocks
To configure Report Control Blocks in your device:
1. Select IEC 61850 Setup from the Meter Setup menu, and then click on the IEC 61850
Reports tab.
2. Select an RCB you wish to view or configure in the “RCB Reference” box.
3. Configure the RCB attributes as required for your application. The following items can be
configured:
• Report ID
• Dataset reference (can be selected from the available datasets list)
• Optional fields
• Trigger options
• Integrity period for periodic reports with the integrity trigger option selected
To change the Optional fields or Trigger options, click the arrow button at the right to the
item, check the appropriate options and click OK.
NOTE
Configure your new and customized datasets and update them in the device, or save
to the device database if you work offline, before configuring reports; otherwise you
may get an incomplete dataset list.
4. Send your new setup to the device and save it to the device database.
To Next Page
Loading...
