SATEL-EASy+
User guide
Version 1.33
2
RESTRICTIONS ON USE – SATEL-EASy+ (403-473 MHz)
SATEL-EASy+ radio modems have been designed to operate on frequency ranges, the exact use
of which differs from one region and/or country to another. The user of a radio modem must
take care that the device is not operated without the permission of the local authorities on
frequencies other than those specifically reserved and intended for use without a specific
permit.
SATEL-EASy+ radio modems are allowed to be used in the following countries, either on licence
free channels or on channels where the operation requires a licence. More detailed information
is available at the local frequency management authority.
Countries*: AT, AU, BE, BG, CA, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HR, HU, IE, IS, IT, LT, LU,
LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR, US
* Codes of the countries follow the ISO 3166-1-Alpha-2 standard
Modification warning statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Class B digital device statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
WARNING!
To be protected against all verified adverse effects the separation distance of at least 50 cm
must be maintained between the antenna of this device and all persons.
In addition to comply with FCC and IC RF exposure compliance requirements, maximum
antenna gain is 14 dBi. The device must not be co-located or operating in conjunction with
any other antenna or transmitter.
To Next Page
Loading...
