SATEL-EASy+
User guide
Version 1.33
49
9 CONFIGURATION
9.1 Radio modem configuration
The configuration of settings can be changed in several ways. User can choose several methods
such as:
LCD menu & Push buttons (the models equipped with a display) The basic settings are
accessible from LCD and push buttons. Some of the functions, for example the Channel list
editing or configuration of Message routing is to be performed using PC software.
SL commands A terminal device can command or configure the radio modem by using special
commands. SL commands are applied especially in cases where radio modems are to be
integrated seamlessly inside a system behind the integrator’s own user interface. See chapter
“SL Commands” for details.
SATEL NETCO DEVICE
SATEL NETCO DEVICE is a software for configuring and reprogramming a SATEL device. The
configuration parameters can be read and written from/to the locally connected, powered
device. The device configuration can be also created/saved/explored from/to a file without
device connection.
SATEL Configuration Manager
SATEL Configuration Manager is a software for configuring and reprogramming a SATEL device.
The parameters can be read and written from/to the connected, powered device. The program
file can be saved into a separate file to be used to other devices. The most common use case for
which the SATEL Configuration Manager is optimized for is editing existing parameters in a
SATEL radio product using locally connected product over a serial interface.
Please visit SATEL WEB pages for additional information:
https://www.satel.com/products/software/
SW compatibility table can be found at https://www.satel.com/products/software/software-
product-compatibility-table/
To Next Page
Loading...
