Satel EASy+ - Page 60

SATEL-EASy+
User guide
Version 1.33
59
SL commands provide an interface for a host device to command the radio modem directly. An
example of the procedure for creating or replacing a channel list:
1. Clear existing channel list (SL$C=0)
2. Set channel info for each of the channels to be created starting from index 0 (SL$L=)
3. Set number of channels in channel list (SL$C=)
4. Set the default channel (SL$D=)
5. Verify the new configuration:
Get number of channels in channel list (SL$C?)
Get channel info for each of the channels (SL$L?)
Get the default channel (SL$C?)
7. Enable Channel list (SL$M=1) in order to activate the Channel list
8. Save the settings (SL**>)