Satel INTEGRA Plus - Zone Bypassing Techniques; 5.10.1 Zone inhibiting; Event Viewing and Partition Timers; 5.11.1 Viewing all events

SATEL INTEGRA Plus 29
Keyfobs are added to the master users (administrators) in the same way.
5.8.7 Removing keyfob
1. When adding or editing a user, run the REM. RX KEY FOB / REM.ABAX KEYFOB function
(depending on which keyfob is to be removed). The appropriate function is only displayed
when a keyfob has already been assigned to the user.
2. When the keyfob number and a prompt whether the keyfob is to be removed are
displayed, press the 1 key. You will be brought back to the list of functions for defining the
user parameters.
3. Press the
key
.
4. When a prompt appears, asking you if the changes are to be saved, press the 1 key.
Removal of a keyfob will not erase its settings (dependences between the buttons
and zones, confirmation rules, etc.). When added to the user, the new keyfob will have
the same settings as the deleted one.
The installer can remove all keyfobs, including their settings, by means of the functions
available in the service mode (STRUCTURE HARDWARE EXPANDERS REM.RX KEY
FOBS / REM.ABAX KEYFOB).
The administrators' keyfobs are removed in the same way.
5.9 Master users (administrators)
The master users (administrators) can be added, edited and removed by the installer. There
can be 1 administrator in each object. The administrator has access to all partitions in the
object and also specifies how the system can be accessed by using the service code. Most of
the parameters which are defined for the ordinary user can be defined for the administrator
(see: “Users” p. 24).
5.10 Zone bypassing
If a zone is not to trigger alarm, you can bypass it, when the partition to which the zone
belongs is disarmed. Zone bypassing is useful, for example, when you want to leave
a window open when the system is armed or when a detector connected to the zone is out of
order and sets off false alarms.
Zone bypassing reduces the level of protection. When bypassed, the zone may enable
the intruder to get inside the protected area despite the system being armed.
If a zone is bypassed because of its malfunctioning, call in the installer (service
technician) immediately to repair the defect.
For security considerations, the installer may reduce the number of zones that the user
will be allowed to bypass.
5.10.1 Zone inhibiting
The zones can be inhibited by the users having the ZONES BYPASSING right. The inhibited
zone will be bypassed until the partition to which the zone belongs is disarmed, or until the
zone is unbypassed by the user.
1. Enter the code and confirm with the
key
.