Satel INTEGRA Plus - Zone Testing Procedures

SATEL INTEGRA Plus 31
5.11 Viewing the event log
The events viewing function, when started by the administrator or the ordinary user,
provides no information about:
 panic alarms,
 alarms triggered using the DURESS type code.
5.11.1 Viewing all events
1. Enter the code and confirm with the
key
.
2. Press in turn the 5 and 2 keys. The last event which occurred in the system will be
displayed.
3. Using the  key, scroll through the list of previous events.
5.11.2 Viewing the events required for Grade 3
If the GRADE 3 option is enabled in the system, the function allowing the installer and
administrators to view events required by EN 50131 for Grade 3 is available.
1. Enter the code and confirm with the
key
.
2. Press the 5 key. Functions available in the EVENTS submenu will be displayed.
3. Using the  key, scroll the menu until the GRADE3 function is found.
4. Press the
key
. The last Grade 3 required event which occurred in the system will be
displayed.
5. Using the  key, scroll through the list of previous events.
5.11.3 Viewing the selected events
1. Enter the code and confirm with the
key
.
2. Press in turn the 5 and 1 keys.
3. When the SELECT EVENTS function is displayed, press the key. The list of event types
will be displayed.
4. Select which event types are to be displayed (see: “Selection from the multiple-choice list”
p. 15).
5. Press
the
key
. This will bring you back to the SELECTED submenu.
6. Using the  key, scroll down the menu until you find the VIEW function.
7. Press the
key
. The last one of the selected events which occurred in the system will be
displayed.
8. Using the  key, scroll through the list of previous events.
In addition to defining the event types to be displayed, the SELECT PART. function can
also be used to indicate the partitions to which the events are to refer.
If the GRADE 3 option is enabled in the system, the installer or administrator can use
the VIEW GRADE3 function instead of the VIEW function. In such a case, the events
selected among those required by the EN 50131 standard for Grade 3 will be
displayed.
5.11.4 Way of presenting events
The following information is shown in the display upper line:
– date and time of event occurrence,