WARNING
Before you start using the control panel, please read carefully this manual in order to avoid
mistakes that can lead to malfunction or even damage to the equipment.
Changes, modifications or repairs not authorized by the manufacturer shall void your rights
under the warranty.
To ensure adequate protection, the alarm security system must be in good working order,
therefore SATEL recommends that it be regularly tested.
The alarm system can not prevent burglary, hold-up or fire from happening, but in emergency
situation it will allow you to take steps to minimize the potential damage (by triggering optical
or acoustic alarm signal, notifying appropriate authorities of the alarm etc.). Thus, it can deter
any would-be intruders.
SATEL's goal is to continually upgrade the quality of its products, which may result in some
changes of their technical specifications and firmware. The current information on
the introduced modifications is available on our website.
Please visit us:
http://www.satel.eu
Hereby, SATEL sp. z o.o., declares that this control panel is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC. The
declaration of conformity may be consulted at www.satel.eu/ce
Factory default codes:
Service code: 12345
User 15 code: 1111
The following symbols may be used in this manual:
- note,
- caution.
To Next Page
Loading...
