Satel PERFECTA - Transmission Tests and Device Information; Test Transmission Procedure; ID and Firmware Version Checks

22 PERFECTA SATEL
 noise level in the 433 MHz frequency d FECTA 16-WRL / PERFECTA 32-WRL,
 the level of radio signal received by the control panel from 433 MHz wireless devices
ban PER
PE A 16-WRL / PERFECTA 32-WRL. RFECT
Enter the user menu and press in turn to run 3.SIGNAL LEVEL function. The signal
level information will be presented as a percentage. You can scroll the list using the
and keys.
6.16.4 Starting the test transmission
The 4.TEST EVENT function makes it possible to test the communication with monitoring
onstati s. Enter the user menu and press in turn to run 4.TEST EVENT function. A
“Manual transmission test” event will be saved to the control panel memory. The event code
nitoring station. will be sent to the mo
The test transmission is sent via all transmission paths which are used for reporting.
6.16.5 ID change
The 6.ID CHANGE function makes it possible to change the individual identification number
nu and press in turn
assigned for the needs of communication via the SATEL server.
1. Enter the user me to run 6.ID CHANGE function.
he
3. Pre
“Change the panel ID ? 1=Yes” message will be displayed.
ss
2. T
. The existing ID number will be deleted and the SATEL server will assign a
new ID number.
The ID number will not be changed until the control panel is connected to the SATEL
server.
6.16.6 Checking the IMEI number / ID number
Using the 7.IMEI/ID function you can check:
 IMEI – individual identification number of the GSM phone,
 ID – individual identification number for the purpose of communication via the SATEL
server (assigned autom ally b e SATEatic y th L server).
TROL application. These parameters are required when configuring the PERFECTA CON
Enter the user menu and press in turn
to run 7.IMEI/ID function. To scroll through
the information, use the
and keys.
the firmware version of devices in system
function, you can check the firmware version of devices included in
6.16.7 Checking
Using the 8.FW VERSIONS
the alarm system:
 control panel,
 expansion modules,
 wireless dev RFECTA 16-WRL / PERFECTA 32-WRL.
and press in turn
ices PE
Enter the user menu to run 8.FW VERSIONS function. Information
firmware version will be displayed. To scroll the list of devices, use the on the control panel
and keys.