SATEL PERFECTA 27
Fig. 3. PERFECTA C
ONTROL application (Android system): configuring the new system
settings.
11. Sirens
The main task of the siren is to provide information about emergency situations by means of
sound or light signals. The installer can configure the alarm system so that the siren will
additionally signal the following:
1 sound / flash – starting the arming procedure (if the exit delay time is 0, the system is
armed immediately),
2 sounds / flashes – disarming,
4 sounds / flashes – clearing alarm,
7 sounds / flashes – arming with keyfob is impossible or the arming procedure has failed.